There are many specifications for the aluminum buckle plate, including the panel width, thickness, hemming height and so on. The selection should be based on the characteristics of the home bathroom. Aluminum buckle plate is divided into two kinds of surface punching and plane. The surface punching can breathe sound and sound, and the interior of the buckle plate is covered with a layer of film cushion, and the moisture can be absorbed by the film through the punching hole, so it is most suitable for the kitchen with more moisture. On the market 600mm × 600mm micro-hole square plate, C150, C100 strips and 300 × 300, 300 × 600 aluminum strips are the most widely used.
The quality of aluminum gussets is not entirely thin and thick. The key lies in the texture of aluminum. The general engineering aluminum gussets have 0.8 mm or even
Thicker, why? Because some of the engineering use of the buckle is very long, in order to prevent deformation, so use a little thick, harder, on the contrary, home use aluminum buckle, rarely more than 4 meters, and There is no heavy weight on the aluminum buckle suspended ceiling. Therefore, the aluminum buckle plate for home improvement can be said to be enough for 0.6 mm. So, why did you go to the Building Materials City and many salesmen told you that they had 0.8mm of them, and some friends said that someone introduced him to 0.88mm; that's because their boards are not enough, so they can only take the thickness to make people - - It's really tireless.
Clearly telling everyone that 0.6 mm is enough. Take the example of an imported brand aluminum buckle plate with a big name on the market, its price is more than 300 yuan per square meter, but its thickness is 0.5 mm, which is worse than 0.6 mm! Why the board is not good or bad? It lies in the thickness but in the substrate. In fact, if the aluminum gusset you are consulting is brand name, most of them are 0.6mm in terms of mid-range.